s.7200L 3 way – 4 seats diverting

情報依頼

full port 1/2" - 1"
hot forged brass ball valve

The RuB S.7200L is the right choice for fluid diversion and is designed with robust maintenance-free components ensuring ease of operation and safety. With a simple 90° turn of the handle, you can divert flow from one downstream outlet to the other. It combines traditional manual operation with modern automation.

It is also very easy to convert from its sturdy lever handle to ISO 5211 actuator flange assembly.

The valve can be purchased separately, with handle or with a RuB actuator already mounted.

 

Technical Data
Quality
  • Electronic 100% seal test guaranteed
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Silicone-free lubricant on all seals
  • Chrome plated brass ball for longer life
  • Each valve is seal tested for maximum safety
  • Performs well in any orientation
  • Strong configuration
Body
  • Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Integrated ISO 5211 and DIN 3337 mounting flange for universal connection to actuator
  • Finest brass according to EN 12165 and EN 12164 (formerly DIN 17660 and UNI 5705-65) specifications
  • 3-way L port design for flow diversion
Stem
  • Blowout-proof nickel plated brass stem
  • Two FPM O-rings at the stem for maximum safety
Sealing
  • Pure PTFE self-lubricating seats with flexible-lip design
  • 4 seal valve design for mixing of various fluids in the system
Threads
  • EN 10226-1, ISO 228 parallel female by female threads

Flow
  • 100% full port for maximum flow
Handle
  • Geomet® carbon steel handle with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • Hanlde removable with valve in service
Working pressure & temperature
  • 20 Bar (300 PSI) non-shock cold working pressure
  • -20°C (-4°F)/ +150°C (+302°F)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
Options
  • Rack and pinion pneumatic actuator (spring return or double acting)
  • Female by female NPT threads
  • S.7200 without handle actuator ready
  • Adapter flange kit with screws
Upon request
  • Custom design
PED directive
  • The product meets the requirements of PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking
Approved by or in compliance with
  • RoHS Compliant (EU)
  • Hygiene and epidemic center in Moscow city (Russia)

 

NOTE: approvals apply to specific configurations/sizes only.

品名数量材料
1Sand blasted unplated body1CW617N
2Seat2PTFE
3Seat2PTFE
4Chrome plated ball1CW617N
5Sand blasted unplated end-cap1CW617N
6Washer1PTFE carbon filled 25%
7Nickel plated stem O-ring design1CW617N
8O-Ring2FPM
9Screw handle stop1CW617N
10Spring1AISI 302
11Unplated spring bushing1CW617N
12Stainless steel screw1AISI 304
13Geomet® plated steel handle1DD11
14Black dipped coating1PVC
Torque for actuator sizing N.m
Torque correction factors

Valve torque can vary according to operating frequency, temperature and friction characteristics of the media.
If media has more or less friction than water, multiply torque by the following factors.

Lubricating oils or liquids                                                 0.8
Dry gases, natural gas, superheated steam                   1.5
Slurries or liquids bearing abrasive particles               1.5÷2.5

Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCES7200L - 3992