s.6400 ISO 5211

full port 1/2"- 4"
hot forged brass ball valve

Valves configuration up to 2″

品名数量材料
1Nickel plated body1CW617N
2Ball seat2PTFE graphite filled 15%
3Chrome plated ball1CW617N
4Nickel plated end-cap1CW617N
5Washer1PTFE carbon filled 25%
6Nickel plated stem O-ring design1CW617N
7O-Ring2FPM
8O-Ring2FPM
9Black anodized flange (only from 2.1/2" to 4")1Aluminum
10Grub Screw (only from 2.1/2" to 4")2CB4FF

Valve ball seats and stem configuration of valves over 2″ is different.

Ball valves are marked CE on end-cap from 1.1/4” to 4” as follow:
CE 1115 cat IIIB+D PS: 5 GAS TS1:-20°C TS2:+60°C

Torque for actuator sizing N.m
s.6400 ISO 5211
Torque correction factors

Valve torque can vary according to operating frequency, temperature and friction characteristics of the media.
If media has more or less friction than water, multiply torque by the following factors.

Lubricating oils or liquids                                      0.8
Dry gases, natural gas, superheated steam         1.5
Slurries or liquids bearing abrasive particles     1.5÷2.5

Pressure-temperature chart
Pressure drop chart
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCES6400 - 3992