s.100 / s.101 – 3 way


3-way hot forged 1/4″ -2″
brass ball valve

Technical Data
  • Chrome plated brass ball for longer life
  • UNI 8858 cycle and torque tests performed
  • Hot forged sand blasted nickel plated brass body and caps
  • 3 way T (s.100) or L (s.101) design allows complete range of flow handling applications
  • Copper alloy brass according to EN 12165 and EN 12164 specifications
  • Maintenance free, thanks to two NBR O-rings at the stem for maximum safety
  • Four seats design limits mixture among various fluids in the system
  • PTFE seats
  • ISO 228 female threads

  • Extra port for lowest pressure drop
Working pressure & temperature
  • See non- shock cold working pressure on chart
  • -10°C/ + 120°C
  • WARNING: freezing of the fluid in the installation may severely damage the valve
PED directive
  • The product described in this document meets the requirements of PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking; it cannot be used with dangerous gases in sizes larger than 25mm; it cannot be used with non-dangerous gases in size larger than 32 mm
Approved by or in compliance with
  • GOST-R (Russia)


NOTE: approvals apply to specific configurations/ sizes only.

1Nickel plated body1CW617N
3Chrome plated ball1CW617N
4Nickel plated end-cap3CW617N
5Nickel plated stem O-ring design1CW614N
6Nickel plated nut1CW614N
9Red handle1Aluminum
Pressure-temperature chart
Pressure drop chart
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCE100 - 4163