s.93 BSPT downstream exhaust


full port 1/2” – 2”
hot forged brass ball valve

Featuring patented tamper- proof lockable handle that has no equal in the market.

RuB s.93 range exhausts automatically and continuously downstream air pressure as soon as turned in the closed position.
Valve is lockable in the closed position only, according to Part. 1910.147 safety
OSHA (USA) requirements allowing safe maintenance of the air-supplied equipment; when valve is open, one simple 90° turn of the handle shuts flow immediately.

We care for those you care for.

Technical Data
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Chrome plated brass ball for longer life
  • Handle stops on body to avoid stress at stem
  • Hot forged sand blasted, external nickel plated brass body and cap sealed with Loctite® or equivalent thread sealant
  • The valve body includes a tapped downstream depressurization venting outlet to direct exhaust air or assemble mufflers for noise control
  • Finest brass according to EN 12165 and EN 12164 specifications
  • Blowout-proof nickel plated brass stem
  • Maintenance-free, double FPM O-rings at the stem for maximum safety
  • Molybdenum filled PTFE self-lubricating seats with flexible-lip design
  • ISO 7/1, BS 21 BSPT taper female by female threads
  • Full port to DIN 3357 for maximum flow
  • Geomet® carbon steel lockable handle patent n. 7074-B/90 with thick PVC dip coating. Handle coating offers both thermal and electrical protection
  • Handle removable with valve in service
Working pressure & temperature
  • 14 bar (200 PSI) non-shock cold working pressure
  • -10°C to +100°C (+15°F to +210°F)
  • WARNING: freezing of the fluid in the installation may severely damage the valve
  • Stainless steel handle (1.4016 / AISI 430)
  • Non-locking Geomet® carbon steel lever handle
  • NPT taper ANSI B.1.20.1 threads
  • EN 10226-1, ISO 228 parallel threads
  • Safety pin
  • Muffler, hose
Upon request
  • Custom design
  • Sizes 1/4″ and 3/8″
  • T-handle
PED directive
  • The product described in this document meets the requirements of PED Directive 2014/68/UE and according to art.4 par.3, it does not require CE marking; it cannot be used with dangerous gases in sizes larger than 25 mm
Approved by or in compliance with
  • RoHS Compliant (EU)
  • OSHA Compliant (United States)

NOTE: approvals apply to specific configurations/sizes only.

1Nickel plated body (external treatment)1CW617N
2Seat2PTFE molybdenum filled
3Chrome plated ball1CW617N
4Nickel plated end-cap (external treatment)1CW617N
5Nickel plated stem O-Ring design1CW617N
6Geomet® nut1CB4FF (EN10263-2)
8Light blue PVC coated Geomet® steel lockable handle1DD11 (EN10111)

DN shows the nominal flow diameter. Actual flow diameter complies with full port
DIN 3357 part 4.

Pressure-temperature chart
Pressure drop chart
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCES93B - 4266