1/2" - 1" standard port
hot forged brass ball valve
The RuB S.7400L is the right choice for fluid diversion and is designed with robust maintenance-free components ensuring ease of operation and safety. With a simple 90° turn of the handle, you can divert flow from one downstream outlet to the other. It combines traditional manual operation with modern automation.
It is also very easy to convert from its sturdy lever handle to ISO5211 actuator flange assembly.
The valve can be purchased separately, with handle or with a RuB actuator already mounted.
NOTE: approvals apply to specific configurations/sizes only.
|1||Nickel plated body||1||CW617N|
|2||Ball seat||2||PTFE graphite filled 15%|
|3||Chrome plated ball||1||CW617N|
|4||Nickel plated end-cap||1||CW617N|
|5||Washer||1||PTFE carbon filled 25%|
|6||Nickel plated stem O-ring design||1||CW617N|
|9||Handle screw||1||Steel 4.8|
|10||Geomet® plated steel handle||1||DD11|
|11||Black dipped coating||1||PVC|
|13||Zinc plated nut||1||Steel 8S|
Valve torque can vary according to operating frequency, temperature and friction characteristics of the media.
If media has more or less friction than water, multiply torque by the following factors.
Lubricating oils or liquids 0.8
Dry gases, natural gas, superheated steam 1.5
Slurries or liquids bearing abrasive particles 1.5÷2.5