s.195 NPT+FLARE

情報依頼

3/8" -1" gas cock
hot forged

Technical Data
Quality
  • 24h 100% seal test guaranteed
  • Dual sealing system allows valve to be operated in either direction making installation easier
  • No metal-to-metal moving parts
  • No maintenance ever required
  • Handle clearly shows ball position
  • Silicone-free lubricant on all seals
  • Handle stops on body to avoid stresses at stem
  • Chrome plated brass ball for longer life
Body
  • Hot forged sand blasted, unplated brass body and cap sealed with Loctite® or equivalent thread sealant
  • Finest brass according to EN 12165 and EN 12164 (formerly DIN 17660 and UNI 5705-65) specifications
Stem
  • Blowout-proof nickel plated brass stem
  • Two FPM O-rings at the stem for maximum safety
Sealing
  • Pure PTFE self-lubricating seats with flexible-lip design
Options
  • Stem extension
  • T-handle
  • AISI 430 stainless steel handle
  • 3/8″ through 1″ NPT female by NPT female (suffix 41)
  • 3/8″, 1/2″ and 5/8″ flare by flare (suffix 30)
  • 1/2″ NPT  female by 1/2″ flare (suffix 31)
  • 1/2″ NPT male by 1/2″ flare (suffix 34)
  • 1/2″ NPT male by 3/8″ flare (suffix 34)
  • 1/2″ NPT female by 3/8″ flare (suffix 33)
  • 1/2″ flare by 3/8″ flare (suffix 32)
  • 1/8″ NPT side tap for some versions/ sizes
Threads
  • NPT taper ANSI B.1.20.1 female by female threads
Flow
  • Standard port for compact design
Handle
  • Aluminum wedge handle enameled red
  • WARNING: do not exceed reasonable temperature and/or electrical load
  • Handle removable with valve in service
Working pressure & temperature
  • 450 PSI non-shock cold working pressure
  • -40°F/ +350°F
  • WARNING: freezing of the fluid in the installation may severely damage the valve
Approved by or in compliance with
  • Canadian standards Association (United States, Canada)
  • GOST-R (Russia)
  • Hygiene and epidemic center in Moscow city (Russia)
  • RoHS Complaint (Russia)
  • Underwriters Laboratories (United States & Canada)
  • Meeting WW-V-35C Federal U.S. Specification

 

NOTE: approvals apply to specific configurations/sizes only.

1.1/4″-2″ hollow ball

品名数量材料
1Sand blasted unplated body1CW617N
2Seat2PTFE
3Chrome plated ball1CW617N
4Sand blasted unplated end-cap1CW617N
5Nickel plated stem O-ring design1CW617N
6Geomet® nut1CB4FF
7O-Ring2FPM
8Red T-handle1EN AC- 46100

DN shows the nominal flow diameter.

Pressure-temperature chart
Pressure drop chart
Ask for additional information on the whole range of RuB products and consult with your supplier for special applications.
XCE195 - 3992